EWS news and events
Event: 2022/12/08 Orientation for new users
Attending an orientation session and signing some documents is necessary for all new EWS users. Next orientation is 2022/12/08 at 17:40. Approx. 60 minutes. Please be on time.
News: Ender 5 plus is under maintenance
Due to a printer hot-end problem, the current state of the Ender 5 plus is unusable. Works are in Progress
News: Past Cornerstone Project Reports are now Available
If you visit the EWS, you can find all the past projects on display.
News: FAQs are now Available
Our teams have spent their time collecting feedback from the students and brainstorming solutions and problems. All your questions and worry has now been answered. Please check it out!
News: Rules section is now Available
You can now check the EWS Rules on our website. Please check it out!
News: Official Trash Box
Ladies and gentlemen, We finally have our official trash box after 2 years. Please check out the Facility section to know more.
News: Raspberry Pi Shortage
The 2020–present global chip shortage is an ongoing global crisis in which the demand for integrated circuits (commonly known as semiconductor chips) exceeds the supply, affecting more than 169 industries. The crisis has led to major price increases, shortages queues, and scalping among consumers for automobiles, graphics cards, video game consoles, computers, household appliances, and other products that require semiconductors. Which has affected the production of everyone’s favorite Raspberry Pi. The EWS has a finite amount of raspberry pi, for now please ask the director(professor) or supervisor(undergraduate) when you want to use the raspberry pi.
Event: (date TBD) Soldering practice 2
Let's learn soldering by building an electronic project, again! The last event was so popular that we decided to hold the same event again. The date is not yet determined but we will announce it here (and in other channels) as soon as we know it.
As before, no prior experience is needed.
We will build a “blinky” circuit that makes two small light-emitting diodes flash alternately. The circuit is battery-operated and you can keep all the parts when it is finished. It has many uses, for example, an additional safety light for your bicycle at night.
This time we will use a printed circuit board (PCB), designed here by the EWS staff, to give the final project a very professional appearance.
Past events
Event: 2022/06/28 Soldering practice
Let's learn soldering by building an electronic project!
No prior experience is needed.
We will build a “blinky” circuit that makes two small light-emitting diodes flash alternately. The circuit is battery-operated and you can keep all the parts when it is finished. It has many uses, for example, an additional safety light for your bicycle at night.